WATER COOLED MOTOR TYPE 63 / 4C

the small size of the water-cooled electric motor makes it easily applicable inside coffee machines, automatic vending machines in general, reverse osmosis water purifiers .

Designed and developed by Mr. Gustavo Zecchin, the water-cooled engine has a copper coil embedded in a fusion of aluminum that during its use performs a preheating of the water, thus saving energy.

Replaces the classic fan motor cooling.

The raw materials are all sourced from certified and top quality suppliers The use of the motor inside reverse osmosis water purification machines is appreciated and widely used. The careful choice of engine certified materials, for customers who need markets with certain certifications, has obtained the UL mark engine

conceived and designed in 1988 by Mr. GUSTAVO ZECCHIN

patent documents​

• 

• 

TECHNICAL FEATURES

nominal power 200 watts – WATT RETURNS 169.00

external diameter 100 mm

voltage 220/230 volts

length excluding pump mm 128

frequency 50/60 hertz

insulation class f

HP. 0.25

thermal protection at 130 °

The water-cooled motor is equipped with special bearings, maximum quietness given by the soft application on anti-vibration mounts, the fixing to the pump is with a screw clamp.

AVAILABLE at 110 HZ 60 AVAILABLE REINFORCED TO 300 WATT – WATT RETURNS 253, 42 v. 220/230 hz 50/60 the engine is slightly longer – mm 151

Electric motor for coffee machines – welding machines – float finisher machines (building sector) / with fixing brackets – switch and cable

The electric motor for coffee machine and welding machines type 63/4 F, thanks to the quality of the material , is a high-performance motor that remains reliable over time. This provides a solution for coffee machine and welding machines, combined also with pump type Z / 3 in brass. It ensures high reliability with a continuous and constant efficiency even in heavy conditions. We also have the version with cable and switch suitable for transferring coolants. Also used in the building sector, always combined with our Z / 3 type pump for float finisher machines.

TECHNICAL FEATURES

type 63 / 4F – clamp V. 220 hz 50/60 power in watts 180 HP 0,25

power at the axis 155.9 watts

single-phase for 4-pole pumping g.1400

torque for locked rotor 11 kg cm

for locked-rotor current 3.5 Amp

for E-class insulation

ball bearings / capacitor 8 mf / continuous duty / 130 ° thermal protector

AVAILABLE at Volt 115 hz 50/60

Electric motor type 71/4, clamp connection, with switch and cable, is suitable for machines for transferring refrigerant liquids combined with a larger pump not of our production but available on the market. The processing of the 71/4 F electric motor is meticulous and the quality of the raw materials, as for all our products, make it reliable and long lasting.

ASYNCHRONOUS ELECTRIC MOTOR PHASE 1 TYPE 71 / 4F CLAMP ATTACHMENT

TECHNICAL FEATURES

g. 1400 poles 4 kw. 0.35 HP. 0,48

insulation class F V. 220 HZ 50

complete with switch and cable

130 ° thermal protection

AVAILABLE AT 110 VOLT HZ 60 W. 330 g. 1500 VERSION ALSO WITHOUT SWITCH AND CABLE

ELECTRIC MOTOR FOR MACHINE AND COFFEE COFFEE GRINDER TYPE 63 / 4F

The electric motor for coffee machine and grinder type 63 / 4F has the same material qualities and workmanship of the electric motor for ventilated coffee machine and water-cooled electric motor by reverse osmosis.

This engine does not have a cooling fan, given the short time of use, so there is no risk of overheating, it still has a 150 ° thermal protection

complete with fixing brackets

TECHNICAL CHARACTERS

Rated power 270 watts

volt 220/230

hz. 50

1.8 amp rated current

insulation class F 155 C ° 12.5 mf capacitor

64 IP protection

Brass pump type Z / 3, normal by-pass, 210 l / h, in / out 3/8 ′′, GAS, female rotor, brass joint, connection to the motor by means of an elastic metal

band flow rate up to 500 l / h at 1450 rpm

applications:

beverage dispensers, coffee machines, water carbonators, reverse osmosis, chemical mixtures, cooling circuits, water filtration and micro-filtration

even in the more compact version, capacity up to 270 l / h at 1450 rpm

motor for float finisher 63 / 4F – v. 220 / 50-60 single-phase 4 hp poles. 0.25 high performance

power 180 watts – 1400 rpm – class F – thermal protector

power at the axis 155,90 watts brass pump z / 3 by pass normal, 200 l / h in / out 3/8 GAS brass joint

(also sold separately